Gantry Type 5-axis Milling Machine
Fa'ailoga o le Masini
1. O nofoa nofoa taʻiala agavale ma taumatau e vavae ese mai le laulau faigaluega, ma o le maualuga tapuni e mafai ona fetuunai saoloto.
2. Faʻaaogaina nut drive, o le saoasaoa o le taʻavale i le taʻavale taʻavale e mafai ona oʻo i le 20m / min.
3. Faʻaaogaina le Iapani THK maualuga-saosaoa, maualuga-saʻo ma le mamafa-tiute laina taʻiala, ma le Z-axis faʻaaogaina faʻataʻitaʻiga laina faʻasolosolo lapopoa e fa i itu e fa e faʻamautinoa ai le tele o le tipiina o le tipiina o le aofaʻi, saoasaoa vave, maualuga maualuga, ma super rigidity, aemaise lava talafeagai mo le tele o oloa Ma le faagasologa o maualuga-saʻo lelei molds.
4. Faʻaaogaina muamua ulu maualuga lima-axis na faia i Siamani poʻo Italia.O le pa'u paleni fa'aleaogaina e matua'i maualalo e mafai ona fa'agaioia mea faigaluega ma le fa'ai'uga maualuga ma le sa'o.O le mautu ma faatuatuaina maualuga-saosa ulu ulu lua e mafai ona ausia manaoga faagasologa o vaega lima-axis.
5. Faʻaaogaina maualuga maualuga-saosaoa uʻamea toso uʻu, mautu ma faatuatuaina.
Fa'amatalaga
| Fa'ata'ita'iga | Vaega | VC5A2516G | VC5A3016G | VC5A3020G | ||
| Nofoaga faigaluega | ||||||
| X/Y/Z malaga | mm | 1600×2500×800 | 1600×3180×800 | 1600×3180×1000 | ||
| Sa tatagi se axis taavili | tikeri | ±110° | ||||
| C axis rotating tatagi | tikeri | ±270° | ||||
| Fua o laulau | mm | 2500×1600 | 3000×1600 | 3000×2000 | ||
| Lafoga uta gafatia | Kg | 15,000 | 20,000 | 30,000 | ||
| Max.lautele utaina o mea faigaluega | mm | 2000 | 2400 | |||
| maualuga o le utaina o mea faigaluega | mm | 1200 | ||||
| Ole mamao ole isu ile laulau | mm | 480-1280 | 280-1280 | |||
| ATC | ||||||
| Malosiaga | tulaga | 20 | ||||
| Ulua'i | ||||||
| Saosaoa (max.) | rpm | 18000 | ||||
| Spindle torque (max.) | Nm. | 90(S1)/120(S6) | ||||
| A/C ulu malosi | Nm. | 707/1250 | ||||
| A/C ulu pipii torque | Nm. | 2000/4000 | ||||
| Fa'amauina spindle | HSK A63 | |||||
| Saosaoa | ||||||
| X/Y/Z axis fafaga saoasaoa | mm/min | 0~15000 | ||||
| X/Y/Z axis vave saoasaoa | mm/min | 20000 | ||||
| A/C axis rotary saoasaoa | rpm | 30 | ||||
| Sa'o | ||||||
| X/Y/Z tulaga | mm | 0.01 | ||||
| X/Y/Z toe fai | mm | 0.005 | ||||
| Tulaga A/C | “ | 2 | ||||
| A/C toe fai | “ | 2 | ||||
| Avetaavale Gaoioiga | ||||||
| afi faomea | KW | 55/67.5(S6) | ||||
| X axis ave afi | KW | 4.3 | ||||
| Y axis ave afi | KW | 4.3×2 | ||||
| Z axis ave afi ma taofi | KW | 5.2 | ||||
| Fua/Mamafa | ||||||
| Fua | mm | 5500×4000×4300 | 6200×4000×4300 | 6200×4400×4400 | ||
| mamafa | t | 30 | 36 | 40 | ||
| Paoa sapalai | KW | 62 | ||||
| Faiga pulea | Siemens 828D 281 | |||||
